Get Help

  1. HomeTruck AccessoriesTruck Bed CoversFolding Truck Bed CoversLEER HF650M Hard Quad Folding Truck Bed Cover

LEER HF650M Hard Quad Folding Truck Bed Cover

Select Vehicle:

Product Information:

List Price: $1,199.00$1,299.99 Sale Price: $999.00$1,069.00Free Ground Shipping*

Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Mon, Jun 28
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Rated 4.66 out of 5 based on 41 customer ratings

Product Description

  • Premium 4 Panel Hard-Fold Tonneau: Top shelf quality, hard quad-folding cover with 4 dent-resistant, fiberglass-reinforced polymer panels in a matte black finish
  • Low Profile, Quad-Fold Design: True flush mount installs, sits very flush, less than 1/2″ taller than your truck bed for a modern, low profile look – 3rd brake light isn’t covered up when fully vertical
  • Secure Lock: Pull to release, and when closing it locks on the driver side (If your tailgate locks, then your cover is locked)
  • Pre-Assembled for Quick Install: Comes pre-assembled for a quick at-home clamp-on installation, plan about 25 minutes
  • Stores Folded Up Flat 3/4 Open or Fully Vertical: Comes with built-in straps to fold up and store behind truck cab & can store vertically for virtually 100% bed access for hauling just about anything. Cover can also be totally removed with the clamps attached to side rails
  • Works with Racks & Bed Rails: Most models compatible with Adarac Pro Series truck racks, truck bed side rails & stake pocket tie downs. (See rack compatibility chat)
  • CNYC™ Release, Latching & Locking System: Exclusive unlocking, latching & automatic locking system secure cover and also can be released on either side of the truck bed with a squeeze of 2 fingers. Tailgate lock required to fully secure bed cover
  • Weather-Tight Design:  Plus no drain tube needed. Unique design sheds rain water and the built-in top and side seals help keep water out of the bed (No truck bed cover is 100% waterproof, though)
  • 450 lb. Capacity & 3 Year Warranty

Not sure what size bed you have? Check out the How To Measure Your Truck Bed Video.

If you are looking for a truck bed cover with a sleek, flush fit and ultimate security, look no further than the LEER HF650M hard quad-folding tonneau with a textured black matte finish. This durable, weather-resistant quad-fold cover is ideal for securing your bed and contents while hauling large items or using your truck for other tasks. The exclusive CNYC release & auto-lock latching system unlocks easily with a squeeze of 2 fingers. This cover can be folded up and stored with your truck bed 3/4 open, or stored fully vertical for virtually 100% truck bed access.

The hard-folding HF650M tonneau by LEER sits less than 1/2″ higher than your truck bed – a sleek, low-profile design superior to all other truck bed covers. The textured matte black panels have built-in seals to keep the water and weather out. This cover possesses a superior water management system – requiring no drain tubes like other folding style covers. The patented LEER HF650M has four lightweight, yet durable, fiberglass-reinforced polymer panels for function, an OE-like look, and heavy-duty usage. The 4-panel design of this truck bed cover makes it easy enough to fold up, and doesn’t block your 3rd brake light when stored fully vertical.

The LEER HF650M can handle 450 lbs., evenly distributed, so no need to worry about heavy loads of wet snow. This cover offers functionality & utility, making loading and hauling large items a breeze. The premium stylish black clamps make installing the cover on your truck easy. The cover unit comes completely assembled – you just clamp on the side rails, clamp the cover unit to the front, and fold it out.

Plus, the inside-the-bed rail mounting design makes it very compatible with other bed rail accessories, such as stake pocket tie-downs, side bed rails, headache racks, and even top-of-rail, stake pocket mount truck bed ladder racks. This hard-fold cover is made by LEER, so it’s built to last.

California Residents: Proposition 65 Warning

41 reviews for LEER HF650M Hard Quad Folding Truck Bed Cover

Add a review

Your email address will not be published. Required fields are marked *

  1. Rated 4 out of 5

    Randy (verified owner)

    Overall a very nice cover. Looks great and very low profile. Easy open latches , no reaching under to pull the cable. This is also better security, no coat hanger tricks to access your truck bed. No leaks, fits well and no roof attachments like some covers. The only thing I would tell Leer is to make the plastic clips that hold the support rods when not in use out of spring steel. Mine came broken and were promptly replaced but should be more durable. Great service from RHRSWAG.

  2. Rated 2 out of 5


    RHR swag went to bat for me when I had to return the cover because it leaked at the first fold. Besides that it fits short on my truck and I felt like I wanted to stretch it out it let some water in at the tailgate and behind the rear window. It looked good but if it lets water in it doesn’t work for me.
    We’ll see if this review stays it looks like all of them are four or five stars.

  3. Rated 5 out of 5

    Doug and Betty Lawrence (verified owner)

    This was our first bed cover purchase. we did a lot of research on different brands, and just kept going back to the LEER brand. Customer service was very helpful. Very satisfied with the quad fold. No broken parts in our box. The paper instructions were very vague on directions. We watched ( and recommend watching ) the LEER company video that gave step by step instructions. It went on with out any problems. My husband and I installed it and we are still together. That’s how simple it was. Looks good, and would recommend the HF650M cover.

  4. Rated 5 out of 5

    Rex Laymon (verified owner)

    This cover was easy to install. Operation is smooth. Very good quality, and looks great.

  5. Rated 5 out of 5

    Heidi Rene Mosier

    Looks Great on my truck and only took a little over 2 hours to install!

  6. Rated 5 out of 5

    Paz (verified owner)

    I love the quad fold leer hard cover. Its was a smart move. Makes my Ford Raptor look SHARP. I’ve had it less than a month though and the support ROD clips snapped off on both sides. Who do I contact for ordering more? Then when ordering I would love to double it.
    Please reply to a very happy customer.

  7. Rated 5 out of 5

    Keith Westheimer (verified owner)

    I bought the HF650M based on reviews I’d seen plus I’d had other Leer products in the past that were solid. It arrived quickly from RHRSwag, so props to them. I luckily did not have broken prop rod holders, they were surrounded by styrofoam in the packaging.

    It went on fairly easily, and as mentioned by other reviewers the directions are a bit vague. However, there is an excellent YouTube video out there that helped a bit to fill in some vague directions. One thing to note (and pointed out in the video) is that the main clamps up near the cab – the two silver ones – must be perpendicular/straight up and down when tightened down, or the cover will not line up as well initially. The included directions make no comment about this, but trust me, make sure they are perpendicular and save yourself some time.

    So far it is held up to rain showers very well, sits about as flush as a cover can, and the latching mechanisms are the bomb.

  8. Rated 4 out of 5

    Tim Martin (verified owner)

    I love it, easy to install and is secure. Improves gas mileage to boot. The only hit against it is like so many others, one of the clips that stow the strut was broken in shipment. They need to find a way to protect it better in packaging.

  9. Rated 5 out of 5

    TODD L HEANEY (verified owner)

    Works with my rear view mirror camera in the third tail light on my High Country.

  10. Rated 5 out of 5

    Brad (verified owner)

    After a great deal of research, I concluded that the Leer HF650M would be the perfect solution to meet my needs. It is a low profile truck bed cover, easy access to entire truck bed, easy to remove, and from a quality and reputable manufacturer of truck accessories — Leer. Many others on truck owner message boards concluded the same thing, except many were having problems gettIng any meaningful customer support from Leer. Several indicated they would never recommend Leer because of the poor customer support, even though they thought it was the best product.


    I had visited and was generally impressed. Then, I noted another truck owner also mention being very responsive with great customer support.

    So, I had my solution. I would order from RHRSwag. I ordered on a Thursday and hoped it would arrive in a week before left town for several weeks. Well, I could hardly believe it, but the 85 lb bed cover arrived in just a little over a day on Saturday!

    I installed it in a few days, and soon discovered a common problem. Two plastic clips for holding the suspension struts cracked/broke. I called RHRSwag.

    And the next day the clips arrived. I called about another issue, and customer support repeatedly followed up until resolved.

    The combination of a very good product with the incredible service from RHRSwag makes buying your accessories from RHRSwag a great decision you won’t regret.

  11. Rated 5 out of 5

    Roy Gaines (verified owner)

    Hey, the Leer bed cover arrived within a couple of days. Easy to install, good quality looks very good on my truck. Great service from RHRSwag.

  12. Rated 4 out of 5


    I bought this specifically because it was the only 4 panel cover on the market. I have 2 cameras on my 3rd brake light (2021 gmc at4). There is no info out there, not 1 video on YouTube, or review saying weather it blocked it or not. Let me do y’all a blocks it when folded up. I tested it in light rain today, seemed that’s looking good. It’s a nice quality cover, from a reputable name brand. I would have saved some money though and got a bakflip or undercover (both made by same company) in the USA vs this in China. Still a good cover and looks great. My prop rod clips were not broke, seems they updated the packaging. There was nice foam around the clips. I couldn’t believe it, after reading everyone else’s came broke. Instructions are not the best, but it’s not rocket science to install this thing. Cync latch is nice vs a pull cable. It should be noted since it’s not in the instructions. If you have the handle for the multi pro tailgate, you use another small clamp as close to it as you can. Then the other side without the handle you use a special clamp included and bolt it through the stake pocket FYI

  13. Rated 4 out of 5


    I bought this specifically because it was the only 4 panel cover on the market. I have 2 cameras on my 3rd brake light (2021 gmc at4). There is no info out there, not 1 video on YouTube, or review saying weather it blocked it or not. Let me do y’all a blocks it when folded up. I tested it in light rain today, seemed that’s looking good. It’s a nice quality cover, from a reputable name brand. I would have saved some money though and got a bakflip or undercover (both made by same company) in the USA vs this in China. Still a good cover and looks great. My prop rod clips were not broke, seems they updated the packaging. There was nice foam around the clips. I couldn’t believe it, after reading everyone else’s came broke. Instructions are not the best, but it’s not rocket science to install this thing. Cync latch is nice vs a pull cable.

  14. Rated 5 out of 5

    Chris Lunde (verified owner)

    Very happy with quality and look. Slight leak based on how well I matched up to ridges on the side. Front and back gaskets work very well. Easy to install. Like others, the clip for struts was broken. Seems Leer would be helpful to just send two extra with the product. Locking open feels real solid and locking closed works well. RHR swag is great to deal with. Product arrived very quickly.

  15. Rated 5 out of 5

    Dalton L

    easy installation! Performs as advertised. So far I love it!

  16. Rated 5 out of 5

    Keith Foote (verified owner)

    This is a very good top and looks really good on my truck. The thing I like about this top is we had really bad storms here and the top kept my bed dry except for a little line down the back of the bed and I think that came in from a gap in the back of my bed. All and all I think it is a very good investment for your truck if you are looking for one and the price is not bad either

  17. Rated 3 out of 5

    Robert Verret (verified owner)

    I bought this cover for my new Colorado because my previous experience with Leer products was generally good and Leer was/is the only cover manufacturer to offer a 4 (instead of normally 3) fold design.
    1.) Instructions are very vague, need better instructions on rail clamping system.
    2.) Overall length is about 1/2″ to 3/4″ too short for the Colorado. I could not get a good seal at both ends without adding a rubber foam seal to the front inorder to get the tailgate to close snuggly against bed cover.

    1.) Appears to be made pretty well.
    2.) Latch mechinism is easier to operate than convenional pull wire found in most bed covers.
    RHR Swag were good people to deal with. They attempted to help with my problems.

  18. Rated 4 out of 5

    Richard (verified owner)

    Great looking cover for your truck gives your truck a clean look . Highly recommend this product was initially going to purchase the back flip but I’m glad this was my final choice. Product came quick was worried when I received it because box was in horrible condition, but it was in great shape when I opened it. The only downside I have and it seems like everyone else does is the prop rods clips break so easy. Overall very satisfied with my purchase.

  19. Rated 5 out of 5

    Brian Anderson (verified owner)

    UPDATE: After posting my review of this nice top, RHRSwag sent 2 replacement clips for the prop rods which were very easy to install. It is a great product and they were very quick to respond to my issue. I highly recommend this product and RHRSwag! Thank you!

  20. Rated 5 out of 5

    Brian Anderson (verified owner)

    I purchased the Leer HF650M after a lot of researching. I really like the 4 panels and it looks very nice on the truck. I wanted something hard and strong, but also something light enough to fold easily and give full access to the bed.

    It is easy to use and appears to be well made. The only exception to that is both prop rod retaining clips were broken right out of the box. It looked to be packaged well with styrofoam around the clips, but it must have shifted just enough to break them in shipping. I haven’t decided whether to try and get them replaced or find another way to secure the rods when not in use. The clips seem to break easily after reading many reviews and I thought I would take a chance as that was not a show stopper for me. I did expect them to be in one piece when it arrived though.

    The only other broken component out of the box was one of the wing nuts used to lock one of the the front tightening knobs in place which had a broken wing off one side. That had to have been that way before packaging as there was no obvious damage to the box when it arrived and the nuts were packaged in a bag with other small hardware. I was still able to use the broken wing nut though.

    After watching the install video, Installation was very easy and I had no issues getting everything lined up perfectly. It is a very nice cover. I would recommend it if broken prop rod clips are not an issue for you.

  21. Rated 5 out of 5

    Reagan (verified owner)

    Cover arrived quick and was easy to install. Best part it looks great on the truck.

  22. Rated 4 out of 5

    Barry Horn (verified owner)

    Leer HF650M.
    Cover looks great, read instructions carefully on what clamp goes where because there are 2 different clamps styles for the 2020 Silverado.
    Shipping was fast but box was handled rough during transit. Both prop rod holders were broken on delivery. Cover itself was in good condition despite the box damage.
    RHSwag customer service is great!
    They had new prop rod holders in the mail ASAP. My only complaint is the HF650M is built in China. If I would have known this I would have picked another cover that is American made.

  23. Rated 5 out of 5

    Larry (verified owner)

    The HF650M has been the best decision for my GMC Canyon. It fits perfectly and was far easier to install than I was expecting. having had other tonneau covers in the past, this one is by far the best. With the recent heavy snow and ice it has held up well, and kept the cargo area dry.

  24. Rated 5 out of 5

    Stephen Melton (verified owner)

    Well, it has been about a month since I installed the tonneau cover. So far, it’s working well and I am pleased with it. I love that I can once again securely keep things in the back of the truck without prying eyes and thieving hands helping themselves to my property.
    The main reason I chose this particular model is the 4 sections, which allows the brake light to be seen. In all honesty. I haven’t used this feature yet, and now believe the 3 section one would have been just fine. Unless you have it folded back often, the 3 section cover would be okay for occasionally carrying higher items.
    The latches work fine and are easily accessible. So far, it has been dry in the back. Not weatherproof, but dry. I see a lot of dust when I open the tailgate. The profile above the bed is quite small, maybe 1/2″ above the rail.
    Installation wasn’t too difficult, but a 2nd person would have been helpful. The rail comes in sections so shipping is less expensive, but assembled nicely.
    Two things I would prefer, were different: one, that the front clamps could be removed easier. Possibly having a knurled plastic-handled bolt or nut that could be turned without a wrench if I wanted to remove the cover completely, as opposed to folding it up. Secondly, a label on the support rods indicating which side attaches to the cover permanently and which side attaches to the rail temporarily. I screwed up on one of the rods and intalled it backwards. The end that is supposed to permanently attach has a spring clip to lock it in place. The other end is just a ball and socket. When I switched it, I couldn’t close the cover without removing the clip. I ended up breaking the locking clip. If it had been labeled, I wouldn’t have installed it the wrong way. Overall, very happy with it.

  25. Rated 5 out of 5

    Barry Schwab (verified owner)

    Although it always seems to me that bed cover clamping systems should be easier to deploy than I find them to be (maybe it’s a personal problem), the HF650M went on pretty well for me. It looks snazzy, and I think that on net I prefer this folding style of cover to the retractable style I had on my last pickup. There are advantages and disadvantages to both, of course, but given the way I generally use my pickup bed, the HF650M works great. Item did arrive with broken prop retainer clips, but RHRSwag took care of that problem for me in no time. THEY are AWESOME!

  26. Rated 5 out of 5

    Brooks (verified owner)

    I did a lot of research to decide which tonneau cover was right for me and my 2019 GMC Sierra SLT. The Leer HF650M check all of the boxes and I’m extremely happy with my purchase. I knew I wanted a hard folding tonneau cover that didn’t require drain plugs (while still keeping the bed dry), gave me full access to the bed, and was easy to use. The latches used to open and close the cover were a huge selling point to because I believe it’s far more secure than the string many of the competitors use, which could be broken into with the use of a metal hanger (or something similar). I would highly recommend this cover and would also highly recommend getting it from RHR Swag. This product, as well as, the other two items that I purchased made it to my house in no time. I’d give them beyond 5 star rating if I could.

  27. Rated 5 out of 5

    tom harvey (verified owner)

    love it. looks good on my 2021 f250. take it to the out back car wash, never any water in the bed. thanks leer

  28. Rated 5 out of 5

    Ken (verified owner)

    Love it – put it on my 2020 F250 – we travel all the time and great to store away. Was easy to install – had it on in about an hour.

  29. Rated 5 out of 5

    John B. (verified owner)

    I’ve had this cover for one month on my 2020 Silverado crew, short bed and so far so good! The box arrived beat to hell with parts sticking out of it but thankfully nothing was broken. My wife and I installed it in about an hour. Not too difficult, but the directions could be more clear and a little larger (how about multiple pages with bigger illustrations?). Although the video covered just the basics, it was was helpful, so thanks for that!

    We were uncertain if we had to install certain clamps and in the end guessed correctly, but still aren’t sure if we were supposed to leave the lower bolts in the clamps (the guy in the video removed them, but the instructions don’t say to). We were also unsure if we had to install the weatherstripping on the bedliner and used the chat bot to find out. We were told no.

    The cover itself is solid and I like the pinch latches used to open it. After the first rain, I noticed some water got in on the right side through one of the folds in the front and rear and maybe the stake pocket. I shimmed the whole cover a bit and that seemed to fix it, but will have to confirm after our next big rain storm.

    As we were testing the folding and keep-open feature, the right clip on the cover broke for the rod. Not surprising because it is thin plastic and definitely a design flaw. I called RHR and they sent me a few replacements that week.

    Last weekend I brought some fence posts home from Lowe’s and experimented with flipping only the last panel up (no tie down for this section). It ended up flipping closed at about 35 MPH.

    Overall, I like this cover so far. It looks good and makes a solid “whump” when you close it. I am curious to see how it handles the TX heat this summer.

  30. Rated 5 out of 5

    Hank Stefano (verified owner)

    Great cover, watching the video made the install easy, the quality is excellent, service is outstanding

  31. Rated 5 out of 5

    Hank Stefano (verified owner)

    Great product, very good quality, watching the video made the install easy, the service is outstanding

  32. Rated 4 out of 5

    Rick Dietrich (verified owner)

    I enjoy my purchase of the Leer hard cover. The quality is better than I expected for the investment. I would recommend it to anyone who wants a hard cove that gives you the ability to use the entire truck bed.

  33. Rated 5 out of 5

    Ken Warren (verified owner)

    Great product, super service! Watch the video, makes installation simple. Very happy customer.

  34. Rated 5 out of 5

    Ken (verified owner)

    Very happy with the cover. Super easy to install if you watch the video. Shipping was fast, great service.

  35. Rated 3 out of 5

    RUDY (verified owner)

    Nice cover. This folding bed cover is the only folding cover I ever had. Honest truth, the locking latch seems flimsy. I can lift up with minimum strength the middle of the cover between the tailgate and make the cover bend, I don’t want to test my full strength. I probably can lift up the corner latch/lock and pop out the lock with my hands. I’m positive a crowbar can pop it open pretty easily. I just hope no one tries to break into my bed cover and destroy it. I’m sure all the folding covers are just like this, no?

  36. Rated 5 out of 5

    Sandi – Las Vegas, NV

    It works, a little heavy folding. Looks beautiful on my chevy.

  37. Rated 5 out of 5

    Jessica Novack

    Very “Happy” with the service and the leer bed cover

  38. Rated 5 out of 5

    Dave & Anne S. Dryden, Wa

    The install instructions could be easier to understand. Appreciated rhr swag being available to help with some questions. Got it figured out and very happy. Also got the 650 cover faster than expected. thanks

  39. Rated 5 out of 5

    Lee Ellis (verified owner)

    Best purchase I`ve made in a long time. Worth every penny! Quality second to none as you would expect from Leer. Super easy to install. Security and looks all in one!

  40. Rated 5 out of 5

    Gene Tarno

    Was fairly easy to install. Instructions could have been a little nicer. Your installation video helped. Happy with the purchase. It’s way better than the leaky bak flip i had on my old truck.

  41. Rated 5 out of 5

    Carrie Meavy

    Very happy with cover. It is a little heavy doing the 4th fold.

Questions and answers of the customers

  1. A Some trucks from Toyota, Jeep, Nissan and even RAM can have a tie down system on the inside bed rails. This will require slightly different hardware to install your LEER 650 quad fold. Please review pic below: [caption id="attachment_267075" align="alignnone" width="461"]Tie-down Utility Truck Bed Rails Tie-down Utility Truck Bed Rails[/caption]
  2. A With both power tailgate and manual tailgates, LEER's Cync locks are on the underside of the cover when closed. So no one can access your cargo with the cover closed and tailgate locked. Simply unlock or drop open your tailgate, reach in to disengage the dual locking Cync system from LEER for opening/access to your truck bed.
  3. A If you have a nice tight seal at the front of the bed without the weather seal it may not be necessary. We'd still suggest applying seal, especially at the bulkhead to protect your cargo from the elements.
  4. A Sadly, no. This cover only opens from the tailgate. However, our friends at Truxedo have a really cool option you may be interested in. Check it out!
  5. A This cover has a sleek, low profile design, and when properly installed, doesn't make noise when driving either in town or on the highway.
  6. A This will sit right below your third brake light, approximately 19" tall.
  7. A Not all all. If you select the dropdown option, "with deck rail system" you will receive specialized clamps that you can use in conjunction with that factory deck rail system.
  8. A We did some tests to to make sure of this and our conclusion is, if your cover is in the upright position, there is a chance it could cover about 5-10% of your view. We are confident that you will have overall vision when in reverse.
  9. A Affirmative, some confusion can arise in this arena however. For absolute clarification, the tie-down rail system that is now available with the classic bed design in RAMs is approved for fit with the LEER 650 quad folding cover. This cover is not compatible with the rail systems included with RamBox storage.
  10. A We have a perfect fit for the new F150s for sure! Check 'em out!!
  11. A The LEER HF650M is compatible with and without GMC's MultiPro tailgate. Click here for more info!
  12. A That is in fact the only color offered by LEER for the HF650M Quad Fold, matte black.
  13. A That may depend on your truck's bed size, but typically we have these covers weighing in around 35-40 lbs. Lightweight yet super-strong, the 650M is effortless opening panel-to-panel.
  14. A Even if you have your toolbox situated all the way to the front of your truck bed, the LEER HF650M would be perfect! Vertical foldability gives you 100% bed access on demand.
  15. A Yes, it does. You will be provided with special clamps that mount inside your truck's deck rail system.
  16. A We do not anticipate any issues installing the HF650M Quad Fold with this headache rack. However, given the mount plate for the rack, you will need to make up for the extra gaps that will undoubtedly result along the bulkhead of your truck's bed with seals or a gasket. Check out our TrailSeal Tailgate Seal Gasket (though design for the tailgate, it will do the trick;)
  17. A There are a couple of options. 1) Sometimes the Cync locks do need a little additional adjustment for best function, please review: Re-adjusting Cync Latch video for step-by-step instructions. 2) It is possible you may need a spacer kit for the rails this cover mounts to. Please reach out to our knowledgeable tech.s for more info: 701-390-1273
  18. A You can absolutely fold this cover to the last, horizontal fold and have the space needed haul your 5th wheel AND be able to see through the rear window!
  19. A Apologies, our LEER line-up does not have compatibility with the CarbonPro bed just yet, stay tuned.
  20. A Apologies, we do not have an option listed for the Leer HF650M just yet for the all-new HD Silverados. Stay tuned, I'm sure we will be rolling them out soon!
  21. A We do not at this time, however, you will be provided with clamps that actually mount inside your truck's deck rail system. Check out LEER's deck rail installation instructions and for more details or guidance, give our tech. experts a jingle (701)-390-1273.
Save cart
Add your Name and Email Address and we will send you an email with a link to this cart so you can use it on another browser or device