Get Help

  1. HomeTruck AccessoriesTruck Bed CoversFolding Truck Bed CoversLEER HF350M Hard Tri Folding Truck Bed Cover

LEER HF350M Hard Tri Folding Truck Bed Cover

Select Vehicle:

Product Information:

List Price: $1,039.00$1,039.00 Sale Price: $859.99$909.99Free Ground Shipping*

Usually Ships on or before Mon, Jun 28
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Mon, Jun 28
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Wed, May 26
Usually Ships on or before Mon, Jun 28
Usually Ships on or before Mon, Jun 28
Usually Ships on or before Wed, May 26
Usually Ships on or before Mon, Jun 28
Reviews
Rated 4.78 out of 5 based on 9 customer ratings
SKU: LEER-HF350M
Brand:

Product Description

  • Premium 3 Panel Hard-Fold Tonneau: Top-shelf quality hard tri-folding cover with 3 folding dent-resistant, fiberglass-reinforced polymer panels in a matte black finish
  • Low Profile Tri-Fold Design: True flush mount installs, sits very flush, less than 1/2″ taller than your truck bed for a modern, low profile look – 3rd brake light isn’t covered up in fully vertical position
  • Secure Lock: Pull to release and when closing, it locks on the driver side (If your tailgate locks, then your cover is locked)
  • Pre-Assembled for Quick Install: Comes pre-assembled for a quick at-home clamp-on installation, plan about 25 minutes
  • Stores Folded Up Flat 2/3 Open or Fully Vertical: Comes with built-in straps to fold up and store behind truck cab & can store vertically for virtually 100% bed access for hauling just about anything. Cover can also be totally removed with the clamps attached to side rails
  • Works with Racks & Bed Rails: Most models compatible with Adarac Pro Series truck racks, truck bed side rails & stake pocket tie downs. (See rack compatibility chat)
  • CNYC™ Release, Latching & Locking System: Exclusive unlocking, latching & automatic locking system secure cover and also can be released on either side of the truck bed with a squeeze of your fingers. Tailgate lock required to fully secure the bed cover
  • Weather Tight Design: Plus no drain tube needed. Unique design sheds rainwater, and the built-in top and side seals help keep water out of the bed (No truck bed cover is 100% waterproof)
  • 450 lb. Capacity & 3 Year Warranty

Not sure what size bed you have? Check out the How To Measure Your Truck Bed Video here.

If you are looking for a truck bed cover with a sleek, flush fit and ultimate security, look no further than the LEER HF350M hard tri-folding tonneau with a textured black matte finish. This durable, weather-resistant tri-fold cover is ideal for securing your bed and contents while hauling large items and using your truck for other tasks. The exclusive CNYC release & auto-lock latching system unlocks easily with a squeeze of 2 fingers. This cover can be folded up and stored with your truck bed 2/3 open, or stored fully vertical for virtually 100% truck bed access.

The hard-folding HF350M tonneau by LEER sits less than 1/2″ higher than your truck bed, and the textured matte black panels have built-in seals to keep the water and weather out. This cover possesses a superior water management system – requiring no drain tubes like other folding style covers. The patented LEER HF350M tonneau cover has 3 lightweight, yet durable, fiberglass-reinforced polymer panels for function, an OE-like look, and heavy-duty usage. The 3-panel design makes it easy enough to fold up.

The LEER HF350M can handle 450 lbs., evenly distributed, so no need to worry about heavy loads of wet snow. This cover offers functionality & utility, making loading and hauling large items a breeze. The premium stylish black clamps make installing the cover on your truck easy. The cover unit comes completely assembled – you just clamp on the side rails, clamp the cover unit to the front, and fold it out.

Plus, the inside-the-bed rail mounting design makes it very compatible with other bed rail accessories, such as stake pocket tie-downs, side bed rails, headache racks, and even top-of-rail, stake pocket mount truck bed ladder racks. This hard-fold cover is made by LEER, so it’s built to last.

California Residents: Proposition 65 Warning

9 reviews for LEER HF350M Hard Tri Folding Truck Bed Cover

Add a review

Your email address will not be published. Required fields are marked *

  1. Rated 5 out of 5

    JOHN SEES (verified owner)

    WE STOPPED IN AT A LEER FACTORY OUTLET TO LOOK AT THIS BED COVER. WE WERE TOLD THAT IT WOULD FIT A 2003 CHEVY 1500 SILVERADO FLEETSIDE WITH A 6′-6″ BOX. TOLD US THE PRICE WHICH WAS MORE THAN LISTED HERE AND IT WOULD TAKE 4 WEEKS TO GET IT. WE LOOKED AT OTHER SITES AND WERE TOLD IT WOULD NOT FIT OUR TRUCK, CALLED LEER AND THIS TIME THEY ALSO TOLD US THAT IT WOULD NOT FIT. RHR SWAG SAID THAT IT WOULD AND OFFERED FREE RETURNS WE DECIDED TO BUY ONE. GLAD WE DID IT DOES FIT OUR TRUCK AS STATED. WE ORDERED IT LATE WEDNESDAY NIGHT AND RECIEVED IT ON SUNDAY.

  2. Rated 5 out of 5

    Chris (verified owner)

    So far, I really like it. The only thing I could say I don’t like would be that at 75+ mph the rubber flap between cab and bed starts chattering against the cab. I’ll fix it somehow.

  3. Rated 5 out of 5

    Normand Belleville (verified owner)

    Looks great easy to install. However heavier than I thought it would be. Seals great with no leaks during Florida downpour. Did have noise from front flap above 50 mph use provided tape along leading edge of bed to seal rubber flap noise gone. Would definitely recommend. Also quick delivery.

  4. Rated 4 out of 5

    Jacob R stewart (verified owner)

    The overall look of this cover is great. I like the functionality too. Installation is easier to line up the tracks on the bedrail with the cover itself and the truck, if you attach the cover to them before tightening tracks to bedrais. I did not use the double-sided tape included and I still did not experience any leaks other than the gap between tailgate and taillights. 2019 silverado 2500. There is not much clearance between each set of locks and the tracks. This is good and bad. There is no wobble, but also must be lined up perfectly. The only issues I have with this product is that the clips that hold the bracing arms when stowed were broken upon opening the box. I reached out to Leer directly, and I have not heard back from them at all. They did not even acknowledge my email. I have not reached out to rhr. Dropped one star due to non-existent customer service from Leer but it is a minor defect.

  5. Rated 4 out of 5

    Nick (verified owner)

    I got this cover for my Ram 2500 and it looks great and has a low profile. The only issue is the rubber flap that goes over the bed at the cab. When driving down the highway it flaps in the wind.

  6. Rated 5 out of 5

    Ralph Perry (verified owner)

    Originally ordered a Extang full tilt soft cover which I’ve had on 3 previous trucks and liked very much. It was very easy to remove and very light. After 5 weeks of waiting I cancelled and ordered a Leer HF350 Tri fold. 5days later it arrived. The package looked like it came from Beruit, but luckily no damage inside. very heavy compared to the other covers but solid. took me a couple of days of fine tuning to make fit but now I give it a thumbs up. I would buy again.

  7. Rated 5 out of 5

    Rudy Lee (verified owner)

    I originally ordered the Gator Cover and after three shipment delays, I cancelled and ordered the Leer HF350M, and I am glad I did. It sits on top of the bed rails, it does not leak and installation is simple and easy. I had one item that was broken and that was taken care of by RHR in a matter of days and I live on the east coast. It looks good on my 2020 Ford Ranger Lariat and I have had many complements already. I love it because I can open the tailgate without having to lift the cover. I have owned two previous Leer hard shell covers with matching paint and they were excellent, but you had to lift the top to open the tailgate. I also love the way it is secure when you close the tailgate as you can not use a coat hanger and open the cover. Well worth the price and the time to install which is minimal. Great Product, Great Price, what more can you ask for?

  8. Rated 5 out of 5

    Dave W (verified owner)

    I recently purchased and installed a Leer HF350 for my ’21 GMC SLT CCSB. I chose this cover because of the design features where it doesn’t use drain tubes and how the cover sits on top of the bed rails, instead of sitting in the rails. I also like the CYNC latching system the Leer has, as it doesn’t have the traditional wire latch pulls that can be opened using a coat hanger and the design appears to be more secure than the other brands.

    For background on my prior trucks I have owned a Undercover Flex, Gator retractable cover and a Bakflip MX4.

    I installed this 3 weeks ago. The packaging was solid, with nothing damaged in shipment. Installation was simple and straight forward. The hardware is of good quality and the fit and finish of this cover is nicer than any of the others I have owned. The overall design is good and it looks like a lot of thought went into the design, specifically how it doesn’t need drain tubes. So far in the rain I did get some water drips in the front corners, along the panel joints on the side rails and along the tailgate. I have since made a few adjustments and the amount of water coming in is less, but there is still some small leaks. Both the Flex and the MX4 leaked a some in heavy rain. So far the Leer is about the same as the others leaking wise, but I think making the some adjustments will help.

    So far I would say I like the Leer 350 best, and now that I have it on the truck I would buy this one again without hesitation. I’m impressed with the Leer’s design, build quality and fit and finish, plus the 350 is available at a good price point. RHR was great to deal with, shipping was fast and I received this a few days earlier than expected.

  9. Rated 5 out of 5

    Jim G. Nashville, TN

    Ordered a bak flip, and it was 5 weeks and still hadn’t shipped. Cancelled and decided to try a leer folding cover. This cover is worth every penny. And it i got it 4 days after I ordered. Thanks

Questions and answers of the customers

  1. A So long as it is a regular bed (not the step-side bed) we have a perfect cover for you! [ click here for your fit ]
  2. A LEER hardfold covers are made overseas, specifically in China. The 350M covers have a 3 year factory warranty that covers defects in materials and workmanship. They also possess a durable coating that is quite scratch resistant. If you buy from us, we can handle any warranty claims on your LEER cover for you.
  3. A You can absolutely drive with the HF350M open - one would need to fold to the final third fold though for safe and secure travels however. Indeed, you can also travel with you tailgate open so long as your trifold tonneau is strapped down in the final third fold, vertical position or closed completely.
  4. A It is not recommended to routinely stand on tonneau covers. However, there is a 450 lb. capacity, evenly distributed, for the LEER HF350M Hard Trifold Cover.
  5. A Though not all components are source directly here in the US, all engineering, design and mold-making resources are located in Elkhart, Indiana
  6. A The Leer HF350M hard folding tonneau cover is made of a variety of year, make and model combinations. Give us a call and we'll find the best fit for you!
  7. A On some applications the main culprit of moisture entering the truck bed (with tonneau covers) is open stake pocket holes. With sealed stake pocket holes and the LEER HF350M on you pickup's bed, you can expect the best water resistance out there!
Save cart
Add your Name and Email Address and we will send you an email with a link to this cart so you can use it on another browser or device