The Kevko Remote Breather Kit is designed to keep your breathers clean and dirt free which saves you time during your meticulous maintenance routine. Have no worry of dirt or debris falling into your valve covers while removing your breathers because this kit is designed to mount to your fire wall. Wash your car without having to worry about covering your breathers because they no longer sit on top of your valve cover. No welding or modification needed! This breather kit is VERY EASY TO INSTALL on any 602, 604 or open motor. Simply remove your old breathers and replace them with the provided slip on fitting and cap on your valve covers. Then run the hose to the remote reservoir that is mounted to your cock pit. The only thing left is to remember to drain the reservoir tank every few nights of racing.
This is NOT an Evac System… This is a Valve Cover Breather set-up
IMCA LEGAL – Hobby Stock, Sport Mod, and other mod type cars.
The breather kit designed for the 602 & 604 Crate Motors requires NO MODIFICATION! Kit comes complete with 1- K9085 Breather Tank, 3′ of K122 Push-lock #12 hose, 1- K117 #12 90 degree fitting, 1- K116 #12 Straight fitting, 1- K9027 Slip on # 12AN for 1-3/8″ breather tube, 1- K9028 Slip on fill & cap for 1-3/8 breather tube.
The breather kit designed for the Open Motors requires NO MODIFICATION! Kit comes complete with 1- K9085 Breather Tank, 3′ of K122 Push-lock #12 hose, 1- K117 #12 90 degree fitting, 1- K116 #12 Straight fitting, 1- K9039 Slip on # 12AN for 1-1/2″ breather tube, 1- K9040 Slip on fill & cap for 1-1/2″ breather tube.
The difference between the two options is the size of the o-ring seal and fill caps that are installed over the breather tubes. Crate Motors typically run 1-3/8″ valve cover breather tubes where most open motors run 1-1/2″ valve cover breather tubes. If you are unsure, please measure your breather tubes before ordering. As always, there is free shipping:)